Laptop Battery Tester with Testing,Charging,Discharging Function

1. support two intelligent battery at once 2. with intelligent protection function 3. suitable for all laptop battery

RFNT2 is a battery testing device with two channels, having the features below:

Supporting two intelligent batteries at once:With charge and test functionsLCD for displaying battery informationLED for indicating working statusPre-charge, fast charge and constant voltage charge for charging stagesWith a USB port for connecting with computers, master machine can monitoring and control slave machineBasic Parameters

Dimensions: 201 x 99 x 35 mm

Weight: 333g

Adapter   Input: AC 100 ~ 240 V   Output: DC 19V 4.74A

Display mode

Segment LCD with white backlight + LED in red and green

Charging mode

Constant current + constant voltage

Charging current

Maximum charging current of each channel: 2.5A

Standby power consumption≤1W

Working temperature

0~40°C        20%-90% RH (Non condensation)

Storage temperature

-20°C~65°C    10%-95% RH (Non condensation)

Maximum charging time: 8 hours

Function IntroductionCharge

Two channels can work independently and serve two intelligent batteries separately. Active, pre-charge, constant current and constant voltage are the stages of charging mode. The initial charging mode depends on the battery voltage, so active and pre-charge don't happen to every batteries.

Test

Testing time is 30seconds and the purpose is to check both the charging and discharging performances. After finishing test, LED flickers with green color and LCD reports the test result.

Normal:              Test           OK            Shown on LCD

Abnormal:            Test           NG            Shown on LCD

Possible causes and solutions for the abnormal:

1)      Cause: battery voltage is too low to discharge

   Solution: try to charge the battery to raise voltage

2)      Cause: remaining capacity is too full to charge any more

   Solution: try to discharge the battery to reduce the remaining capacity

3)      Bad contact of battery connecting wires

4)      Damaged battery

5)      Tester trouble

Online Functions

Tester can be connected with master machine via a USB port. Users can monitor, control and set parameters via Battery Manager software in the master machine.

Monitoring

Battery information can be monitored via three windows.

Home screen

Battery bar and brief information can be read on home screen.

Battery detail information window

Show smart battery data in real time and the data can be saved and printed in image format.

Battery graph window

Voltage, current and capacity are traced in curves.

Control

Battery Manager can control slave machine completely. Right-click menu on the battery bar includes the related commands.

Parameters

Users can set working parameters via set parameter window in Battery Manager.

OthersActive coolingActive batteries of zero voltage

When a battery is deep discharged, the discharge protection circuit will start up and the voltage in the battery connector will become zero voltage. In this case, an appropriate voltage should be supplied to active the battery.

Battery identification

Battery information can be read from battery management chip after establishing communication.

Intelligent protection

Against over-current, over-voltage, over-charge, over-heat and short circuit.

Suitable for almost all laptop batteries, above 95%StructureAccessories

1).1 x adapter

2). 1 x USB cord

3). 1 x CD

4). 13 x connectors

5). 10 x cables

6). 10 x jumpers

Tester Kit

Laptop Battery Tester with Testing,Charging,Discharging Function